Hargrove Inc. elects to use the Esko Kongsberg and i-cut Suite digital finishing solutions for 2013 Presidential Inauguration displays - Esko

Hargrove Inc. elects to use the Esko Kongsberg and i-cut Suite digital finishing solutions for 2013 Presidential Inauguration displays

March 27 2013

Hargrove Inc. elects to use the Esko Kongsberg and i-cut Suite digital finishing solutions for 2013 Presidential Inauguration displaysMiamisburg, OH (USA), March 2013 – For the sixth consecutive time, and the 17th overall, Lanham, Maryland-based Hargrove, Inc. was selected as the official general services contractor for the Presidential Inaugural Committee, from January 20-21, 2013 at Washington, DC venues including the Walter E. Washington Convention Center and National Building Museum. For Obama's second inauguration, the trade show, exhibit, and event production company worked on the two official balls from the Presidential Inaugural Committee, the committee's candlelight dinner at the National Building Museum, the Kids Inaugural, the official parade floats, nine unofficial events, and the large volume of signage related to the inaugural activities. Hargrove managed an extensive variety of responsibilities including design, fabrication and production as well as management of all technical services (lighting, sound and video). And, nearly 43,000 square feet of the displays they created were finished using Esko´s digital finishing solution: the i-cut Suite layout software and the Kongsberg i-XL24 finishing system.

As one of the leading event, trade show and exhibit companies in the U.S., Hargrove has played a role in each inaugural since President Harry S. Truman’s second inaugural in 1949 and has served as the official general contractor since President Bill Clinton’s first inaugural in 1993. Hargrove is one of the top 12 event companies in the U.S., serving more than 1,000 tradeshows, events and exhibits each year.

Hargrove Inc. elects to use the Esko Kongsberg and i-cut Suite digital finishing solutions for 2013 Presidential Inauguration displays“We created about 78,000 square feet of graphics that covered various stages and floats, printing different designs on a Vutek GS3200, a Scitex XLJET 1500 and a Roland SOLJET PRO4 XR-640,” comments Rush Zbir, Hargrove director of the graphics department. “More than half of them were sent to Esko´s Kongsberg table – everything from flat Presidential seals to 3D seals, logos, and cut-out shapes.

The biggest challenge? Hargrove did not have a signed contract until just before Christmas. It takes almost 3,000 man-hours to build eight floats. This year they had 20 days to put everything together, with close to 60,000 man hours. The turnaround time was even more significant when you consider that the company was also involved with eight other major projects and 75 regular projects, including a major corporate project and auto trade show. “We started ‘swinging a hammer’ just three weeks before all these materials were due,” notes Zbir. “We worked straight to the event. All 250 full-time employees get involved in the project, along with 70 temporary workers hired specifically to work on the inauguration. Our graphics department ran three shifts 24/7. Sixteen people were working seven days a week, and as many as 15 hours a day.

“We used more than 60,000 feet of lumber. We fabricated the wall and trim structures, and all of the ancillary design items for ballrooms. Most were finished using the one Kongsberg table,” adds David Flanery, Director of fabrications.

Hargrove Inc. elects to use the Esko Kongsberg and i-cut Suite digital finishing solutions for 2013 Presidential Inauguration displays“Back in the day, we printed and cut all the materials by hand. We had 25 people on the floor manually putting printed vinyl materials onto the substrate and measuring how to get it cut. Now, without our Kongsberg table, we would have needed much more manpower. We’d have to employ twice as many temporary staff just to get the graphics produced,” says Aaron Capp, senior operator. “Our Kongsberg i-XL24 is the backbone of the graphics department. Everything has to be finished, and most pieces need a custom cut. They’re rarely square. We could not have gotten the job done without the system.”

“The Kongsberg table allows us to create more challenging graphics—for example, eight-foot dimensional seals, each with six to seven layers of different substrates with routed letters, aluminum and other materials,” says Christopher ‘Chewy’ Marcotte, Hargrove CNC operator. “Remember, everything has to be of production quality for television. The pieces are covered in muslin, and there cannot be any seams. The most intricate piece was the seal. We cut materials like Lexan, Dibond, Sintra, polycarbonates and acrylic. We work on many more complex materials than foam boards.”

“Every part of our company gets involved to create the Presidential seals. When the work is complete, nothing goes until everyone looks at each piece 100%,” adds Flanery. “Only then does it get packed into a truck. Inaugurals very special, and not everyone can get them done. Quality is ‘number one’ for an event like this.”

The cutting instructions themselves are created in Esko´s i-cut Suite Layout. “Before we had our cutting software, we were nesting our graphics in Adobe Illustrator,” remembers Zbir. “i-cut Layout sped the process up a lot. It has reduced file preflight by 75%. Now, we can do more in an eight-hour shift, and we can move from one project to another seamlessly.”

“Our client, the Presidential Inaugural Committee, was very happy. This is more than a project to Hargrove. Of course the turnaround is a challenge, but many of us have been involved in at least one. Hargrove has demonstrated that we have the dedication, history and expertise. We understand what it takes to do a successful job for them. This project translates to all of the other work we do,” concludes Lana Ostrander, Director, Marketing and Public Relations. “Last year was our biggest year. We managed three global summits, state and international events, and the Democratic National Convention. We produced 1.5 million square feet of graphics, which would cover 23 football fields – including the end zone. Starting with the Presidential Inauguration, 2013 looks to herald an extraordinary era for our company, and the Kongsberg table will continue to play an important role for us.”


About Hargrove, Inc. (www.hargroveinc.com)

Hargrove is a nationally renowned general contractor for trade shows, events and custom exhibits. From major industry trade shows to high profile, national events and custom exhibits that successfully drive revenues, Hargrove helps corporations, associations and organizations bring their vision to life with face-to-face experiences.

Hargrove offers its clients personalized service delivered with care by its exceptional team. The company, one of the top 3 general contractors in the U.S. and is considered a leader in creative solutions across its three sales divisions and continues to experience increased market share.

Hargrove uses dynamic creativity, unparalleled service and an unwavering focus on quality to create world-class trade shows, special events and custom exhibits for our clients. Our unique solutions are not only customized to meet each client’s specific needs and goals, but delivered by a dedicated team focused on success. At Hargrove, our customer’s success is our success.